AKG C680BL
The C 680 BL is a cost-efficient tabletop microphone for inconspicuous installation.
The transducer shock mount minimizes knocking noise pickup from the table.
The supplied strip of special adhesive tape allows you to fix the microphone temporarily on a table without staining the table or leaving any residue after removal.
Preferred uses include conferencing, lectern, or places of worship
Features:
Small and inconspicuous boundary layer microphoneShock mounted transducerCardioid polar patternEasy to repaintIntegrated phantom power adapter Specifications:
Polar pattern cardioidFrequency range 60 to 20,000 HzSensitivity 30 mV/Pa (-30 dBV)Max. SPL 115 dB (k=1 %)Equivalent noise level 27 dB-ASignal/noise ratio (A-weighted) 67 dBImpedance 200 ohmsRecommended load impedance >2000 ohmsSupply voltage 9 to 52 V phantom power to DIN/IECCurrent consumption <2 mAConnector 3-pin XLRCable 3 m (10 ft.)Finish matte blackDimensions 97 x 67 x 20 mm (3.9 x 2.6 x 0.8 in.)Net weight 100 g (3.5 oz.)Shipping weight 400 g (14 oz.)The boundary layer microphone shall have a hypercardioid pattern and shall fit within a rectangular envelope given by: 97 x 67 x 20 mm (3.9 x 2.6 x 0.8 in.).The sensitivity shall be no lower than 30 mV/Pa, and total harmonic distortion (THD) at an operating level of 115 dB shall be no greater than 1 %.The equivalent noise level shall be no greater than 27 dB-A. The frequency response shall be flat from 60-20,000 Hz.The microphone shall operate on phantom power over the range from 9 to 52 volts dc. Net/shipping weight: 100/400 g (3.5/14.1 oz.).Get Your AKG C680BL Today!
